SYSTESTER Instruments Co.,Ltd.-PRODUCRS

PRT-2201 Rub Tester

PRT-2201 Rub Tester is professionally designed for abrasion resistance of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument could effectively analyze the problems of poor abrasion resistance, ink layer falling off, lower printable force and poor...

Video

Configuration

Application

Features

Embedded system, easy to remote maintenance and upgrade
Touch screen operation
TFT real color display
UI flattening design, easy to operate
Load block auto reset before start a test
Silence working

Technical

Rub pressure	20±0.2N
Rub speed	43cpm
Rub area	155mm(L) × 50mm(W)
Rub times	0 – 9999
Specimen size	230mm(L) × 50mm(W)
Dimension	255mm(L) x 235mm(W) x 370mm(H)
Power supply	AC 220V 50Hz
Net weight	25kg

Standard

GB 7706

Configuration

Standard: mainframe, load block

Optional Parts: Non-standard load block

Note: Specifications are subject to change without prior notice.

NAVIGATION

HOME ABOUT US PRODUCTS SERVICE NEWS CONTACT US

PRODUCTS

Oxygen Permeability Tester Gas Permeability Tester Water Vapor Permeability Coefficient MORE

CONTACT US

Add：No. 1929 Meili Road, Jinan, China

Tel：+86-0531-87031169

Email：trade.en@systester.cn

Whatsapp/Cell： +86 18765316730

MENU

HOME

ABOUT US

PRODUCTS

SERVICE

NEWS

CONTACT US

PRODUCTS

REQUEST A QUOTE

WVTR-C6 is based on the weighing method and available for the water vap...

More+

This thickness tester is based on contacting method and designed to pre...

More+

The HTT-3701 Hot Tack Tester is a highly accurate instrument for hot ta...

More+

GTR-7004 tester is suitable for the analysis and determination of the a...

More+

VIEW ALL

PRT-2201 Rub Tester

Application

Features

Technical

Standard

Configuration

More+

OTR-1903 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages.

More+

More+

WVTR 926 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages.

More+

More+

WVTR-C12 is based on the weighing method and available for the water vapor permeability test of plastic films, aluminum foil, aluminized films, plastic composite films and many others.

More+

WVTR-C6 is based on the weighing method and available for the water vapor permeability test of plastic films, aluminum foil, aluminized films, plastic composite films and many others.

More+

WVTR-C3 is based on the weighing method and available for the water vapor permeability test of plastic films, aluminum foil, aluminized films, plastic composite films and many others.

More+

WVTR-C1 is based on the weighing method and available for the water vapor permeability test of plastic films, aluminum foil, aluminized films, plastic composite films and many others.

More+

WVTR-398A is based on the humidity sensor detection method and available for the water vapor permeability test of heat exchange membranes, nonwoven fabrics and flexible barrier materials. It can test 6 specimens in one operation with independent results.

More+

WVTR 920 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.

More+

WVTR 226 is based on the infrared sensor method and available for the water vapor permeability test of flexible films, sheeting and packages.

More+

WVTR 220 is based on the infrared sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.

More+

More+

It is used for evaluating the torque retention of continuous thread closures on containers, and measuring the torque required to tighten or unscrew the closure from a container.

More+

This thickness tester is based on contacting method and designed to precisely measure thickness of plastic films, aluminum foil, aluminized films, plastic composite films, paper-plastic composite films, coextruded films, aluminum foil composite films and many others.

More+

For the measurement of the comparative tack of pressure-sensitive adhesives by a rolling ball and is most appropriate for low-tack adhesives.

More+

The qualitative and quantitative determination of the permeability, selectivity and separation rate of various gases for separation membrane.

More+

For determining the ability of pressure-sensitive tapes to remain adhered under constant load applied parallel to the surface of the tape and substrate.

More+

For determining the ability of pressure-sensitive tapes to remain adhered under constant load applied parallel to the surface of the tape and substrate.

More+

More+

More+

FIT-1701 Pendulum Impact Tester is professionally applicable to the determination of resistance to impact-puncture penetration of films, sheets, composite films, aluminum foils and other materials.

More+

OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.

More+

For the professional test of peeling force and bond strength Of various kinds of flexible laminated plastics or equivalents.

More+

For the determination of gross leaks in ﬂexible packaging containing a headspace gas by bubble emission method.

More+

More+

Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries.

More+

Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries.

More+

More+

GTR-7004 tester is suitable for the analysis and determination of the air permeability and the air resistance of various kinds of battery separation membranes, heat exchange membranes, paper, textiles, non-woven fabrics and other materials.

More+

More+

GTR-704C tester is applied for is suitable for the analysis and determination of the air permeability and the air resistance of various kinds of battery separation membranes, heat exchange membranes, paper, carbon paper, textiles, non-woven fabrics and other materials.

BACK