DPT-3401 Disk Peeling Tester

Suitable for intaglio printing process production of plastic film and cellophane upholstery printing materials (including composite film printing materials) for printing ink layer binding fastness test; It is also suitable for testing the adhesion state of the surface layer formed by vacuum coating, surface...

Video

Application

Features

Technical

Standard

Configuration

Application

Features

Technical

Pressure	100N
peeling speed	0.8m/s
Outside dimension	345 mm (L)×188 mm (B)×235 mm (H)
Power	AC 220V 50Hz
Weight	23kg

Standard

GB 7707、JIS C2107、JIS Z0237

MENU

HOME

ABOUT US

PRODUCTS

SERVICE

NEWS

CONTACT US

PRODUCTS

REQUEST A QUOTE

WVTR-C6 is based on the weighing method and available for the water vap...

More+

This thickness tester is based on contacting method and designed to pre...

More+

The HTT-3701 Hot Tack Tester is a highly accurate instrument for hot ta...

More+

GTR-7004 tester is suitable for the analysis and determination of the a...

More+

VIEW ALL

DPT-3401 Disk Peeling Tester

Application

Features

Technical

Standard

Configuration

More+

OTR-1903 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages.

More+

More+

WVTR 926 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages.

More+

More+

WVTR-C12 is based on the weighing method and available for the water vapor permeability test of plastic films, aluminum foil, aluminized films, plastic composite films and many others.

More+

WVTR-C6 is based on the weighing method and available for the water vapor permeability test of plastic films, aluminum foil, aluminized films, plastic composite films and many others.

More+

WVTR-C3 is based on the weighing method and available for the water vapor permeability test of plastic films, aluminum foil, aluminized films, plastic composite films and many others.

More+

WVTR-C1 is based on the weighing method and available for the water vapor permeability test of plastic films, aluminum foil, aluminized films, plastic composite films and many others.

More+

WVTR-398A is based on the humidity sensor detection method and available for the water vapor permeability test of heat exchange membranes, nonwoven fabrics and flexible barrier materials. It can test 6 specimens in one operation with independent results.

More+

WVTR 920 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.

More+

WVTR 226 is based on the infrared sensor method and available for the water vapor permeability test of flexible films, sheeting and packages.

More+

WVTR 220 is based on the infrared sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.

More+

More+

It is used for evaluating the torque retention of continuous thread closures on containers, and measuring the torque required to tighten or unscrew the closure from a container.

More+

This thickness tester is based on contacting method and designed to precisely measure thickness of plastic films, aluminum foil, aluminized films, plastic composite films, paper-plastic composite films, coextruded films, aluminum foil composite films and many others.

More+

For the measurement of the comparative tack of pressure-sensitive adhesives by a rolling ball and is most appropriate for low-tack adhesives.

More+

The qualitative and quantitative determination of the permeability, selectivity and separation rate of various gases for separation membrane.

More+

For determining the ability of pressure-sensitive tapes to remain adhered under constant load applied parallel to the surface of the tape and substrate.

More+

For determining the ability of pressure-sensitive tapes to remain adhered under constant load applied parallel to the surface of the tape and substrate.

More+

More+

More+

FIT-1701 Pendulum Impact Tester is professionally applicable to the determination of resistance to impact-puncture penetration of films, sheets, composite films, aluminum foils and other materials.

More+

OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.

More+

For the professional test of peeling force and bond strength Of various kinds of flexible laminated plastics or equivalents.

More+

For the determination of gross leaks in ﬂexible packaging containing a headspace gas by bubble emission method.

More+

More+

Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries.

More+

Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries.

More+

More+

GTR-7004 tester is suitable for the analysis and determination of the air permeability and the air resistance of various kinds of battery separation membranes, heat exchange membranes, paper, textiles, non-woven fabrics and other materials.

More+

More+

GTR-704C tester is applied for is suitable for the analysis and determination of the air permeability and the air resistance of various kinds of battery separation membranes, heat exchange membranes, paper, carbon paper, textiles, non-woven fabrics and other materials.

BACK